Magellan MG-6060 Installationshandbuch PDF herunterladen (Seite 29)

Paradox Magellan Systems 27

Monitoring Station Telephone Numbers (MSTNs)

Section [111] = Monitoring Station Telephone Number 1

Section [112] = Monitoring Station Telephone Number 2

The Magellan console uses the MSTNs (M

onitoring Station

elephone Numbers) programmed in sections [111] and/or [112]

to connect and communicate with the monitoring station. The

following situations also apply:

• If after eight attempts of calling one monitoring station

telephone number have failed, the console will then dial the

backup telephone number (if section [099] option [1] is

enabled. See MSTN 2 as Backup Number on page 27).

• If the Alternate Dial option (see page 29) is enabled, the

console will dial the programmed backup telephone number

after every failed attempt (if section [099] option [1] is

enabled. See MSTN 2 as Backup Number on page 27).

• If no backup telephone number is programmed, the console

will never report to the backup telephone number.

For more information on how these telephone numbers are

used, please refer to Event Call Direction on page 28 and

Reporting Formats on page 28. Also refer to Delay Between

Dialing Attempts on page 29.

MSTN 2 as Backup Number

Section [099]: Option [1]

Option [1] OFF = Use MSTN 2 as a monitoring station

telephone number only

Option [1] ON = MSTN 2 can be used a backup telephone

number (default)

MSTN 2 can also be used as a backup telephone number. If

section [099] option [1] is enabled (ON) the console will use

MSTN 2 as a backup telephone number.

For more information, please refer to Monitoring Station

Telephone Numbers (MSTNs) on page 27 and Alternate

Dial Option on page 29.

Pager Telephone Number

Section [113]

The Magellan console uses the Pager telephone number

programmed in section [113] to connect and communicate the

numeric pager message programmed in section [114] (see

Pager Reporting Message on page 27) to a pager.

Pager Reporting Message

Section [114]: 32-digit decimal number (0 to 9 as well as [*]

and [#])

Program the desired numeric message you wish to send

whenever the console dials the Pager telephone number in

section [114]. If the message is less than 32 digits, press the

left [

ACTION

] key (

) to save the message.

Voice Message Telephone Numbers

The Magellan console will use the Voice Message telephone

numbers (which are programmed in the Installer menu. Refer to

the Magellan Quick Setup Guide for more information) to play a

pre-recorded message to an external telephone or cellular

telephone. Please note the following when programming and

using this feature:

• The console will only dial a Voice Message telephone

number when the system is in alarm. The console begins

with the first programmed Voice Message telephone

number.

• When the call is connected, the console will play the pre-

recorded message and the zone labels of all the zones that

are in alarm.

• Once the telephone call from the Magellan console is

received, the [#] key on the telephone can be pressed twice

to acknowledge and end the message or the [1] can be

pressed to use the speakerphone feature and talk through

the Magellan console.

• The console will repeat the message a programmed amount

of times (see Voice Message Repetitions on page 27) if no

acknowledgement is immediately received.

• If no acknowledgement is received before the number of

repetitions has elapsed, the console will then call the next

programmed Voice Message telephone number and repeat

the process.

• After calling the last programmed Voice Message telephone

number without an acknowledgement, the console will once

again call the first Voice Message telephone number and

repeat the process a maximum of three times.

• If no acknowledgement is received after the third time, the

console will generate a Fail to Comm. event and trouble.

Voice Message Repetitions

Section [079]: 001 to 255 repetitions; Default = 3 repetitions

This feature determines the amount of times the console will

repeat the pre-recorded message played with the Voice

Message telephone number without receiving an

acknowledgement. Enter any 3-digit number from 001 to

255 into section [079] to program the Voice Message

Repetitions feature.

Service Telephone Number

Section [119]

When a specific trouble occurs (Fail to Comm., Console Tamper

or Supervision Loss), the console will offer you the option of

calling the telephone number programmed in section [119]. After

selecting the option, the console becomes a speakerphone.

Refer to the Magellan User Guide for more information

on using this feature.

Utility Reporting

Within the Utility Reporting menu, customize what events and

when these events will be reported to the user. One to four report

types can be programmed to have the Magellan console call the

user on up to two different telephone numbers with a pre-

recorded voice message when certain conditions are met. Once

the telephone call from the Magellan console is received, the [#]

key on the telephone can be pressed twice to acknowledge and

end the message or the [1] can be pressed to use the

speakerphone feature and talk through the Magellan console.

To program the Utility Reporting feature using the Magellan

console:

1. Press [

] and then press the [4] key.

2. Enter the [

INSTALLER

CODE

] and then press the [3] key.

3. Press [

] until the Utility Reporting screen appears, then

press [

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Magellan MG-6060 Installationshandbuch Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Magellan MG-6060